Job Details
 

Job Display - Return to Search Results

Fire Alarm Electrician Lawrence Berkeley National Laboratory Job at IAEI


Berkeley,, Lawrence Berkeley National Labs ( LBNL ) Facilities Division is offering an exciting opportunity to work with world leaders in science, and be a part of a team that will advance science and influence the world. The Fire Alarm Electrician is responsible to operate, inspect, maintain, test, service, troubleshoot, and initiate and coordinate repairs by other crafts as required to maintain the viability of equipment comprising the Laboratorys fire alarm system, water based and other suppression systems, including but not limited to automatic and pre-action sprinklers, wet and dry chemical, foam generators, carbon dioxide and halogenated fluorocarbon agents. You must be available to report and work on-call on a rotational basis with other Fire Alarm Electricians on weekends. You may work extended workday/week assignments with little to no notice and must be available to respond to emergency call-ins. Berkeley Lab is located above UC Berkeley, on 202 acres that house over two million square feet of state-of-the-art scientific centers and support facilities. The Labs mission encompasses many scientific fields, and its buildings include supercomputing facilities, genetic sequencing labs, laser labs, microscope facilities, and office complexes. Thirteen Nobel Prizes have been associated with Berkeley Lab. Responsibilities: Independently, perform predictive and preventative maintenance inspections, tests, and repairs as required by codes and standards as well as site specific requirements. Perform sustaining services to the facility as required, including, but not limited to troubleshooting and repairs of doors, smoke dampeners, and other related mechanical equipment. Test, operate, connect, install, calibrate, adjust, clean, service, replace and repair life safety and fire alarm components and systems comprising the initiating, indicating, signaling and control components. Update and submit prints to maintain the accuracy of equipment and testing databases. Document and/or regularly update work order status and logs. Complete code required reports and any other applicable codes. Fabrication of complex electrical and/or fire alarm controls systems and related equipment. Coordinate both shop and field fabrications of complex electrical and/or control systems and related equipment. Direct the fabrication, placement and termination of various types of cable assemblies, conductors and wires. Comply with Lab implementation of Department of Energy (DOE) health and safety policies and other applicable Federal, State, and local fire, health, safety, emergency-preparedness, pollution-prevention, and environmental protection policies. Use Personal Protective Equipment (PPE) including but not limited to protective clothing, safety equipment when appropriate. Perform all work safely and be particularly aware of potentially hazardous operations or conditions. Immediately stop work in the event of danger to people or property. Notify your supervisor and, when appropriate, the building manager or the Environmental Safety Hazards Control Department. Report promptly and correct when appropriate any hazardous conditions that are discovered. Proceed with work only after having ensured that appropriate safety procedures have been implemented. Plan work with full consideration of safety. Ensure that all unique activities that involve potentially hazardous conditions are carried out in conformance with current Lab safety policies and procedures to ensure that risks are acceptable. If you are injured, feel pain, or become ill, immediately report your condition to your supervisor. Minimum Qualifications: Have obtained and maintained NICET Level I certification for Fire Alarm and have the ability to achieve NICET Level II certification for Fire Alarm within a reasonable time. At least 2 years, in field installations and field/shop maintenance and repairs. 3 years experience troubleshooting, identifying and correcting malfunctions on DC controlled systems. Operational familiarity with fire alarm equipment manufactured by Siemens as well as other manufacturers. Possession of excellent verbal and written communication, interpersonal and listening skills for working in a diverse team environment, and the ability to clearly communicate over telephone and two-way radio. Able to read, interpret, and apply prints, schematics, wiring diagrams, flow charts, logic diagrams, ladder diagrams and narrative operational and functional procedure descriptions. Able to use computers effectively for record-keeping and communication; effectively use email, MS Word and MS Excel. Able to use portable and fixed drills, saws, grinders, and sanders; use continuity testers, voltage indicators, DC clamp-on ammeters and multi-meters to measure resistance, amperage and voltage. Knowledgeable in the usage of benders/cutters/threaders/anchor/fastener tools. Have a working knowledge of the standards and codes applicable to fire alarm and life safety systems and electrical safe work practices. Possession of a valid California license. Able to climb stairs, ladders, scaffolds, work at heights; work in confined spaces, around rotating equipment, under florescent lights; able to bend, stoop, kneel, crawl, manual dexterity in both hands; must use protective clothing, safety equipment and respirators. Able to lift up to 50 lbs. to chest height (unassisted), and be able to distinguish colors. Must be available to respond to emergencies during off-hours including weekends and holidays. Must be able to perform work in a safe and efficient manner with minimal supervision. Additional Desired Qualifications: Have obtained and maintained California fire/life safety certification. NICET Level II certification preferred. NICET Level III certification is highly desirable. Operational familiarity with fire alarm equipment manufactured by Fenwal, Cerberus Pyrotronics, Notifier, Potter and other commonly utilized fire alarm manufacturers equipment. Must have operational familiarity with System 3, MXL, XLS, Vesda and Analaser Systems. Knowledge of LBL facilities layout, key personnel, procedures governing stores issues, safety program and facilities design requirements. Knowledge of work order systems in Maximo and DataSplice. Notes: This is a full-time career appointment, exempt (monthly paid) from overtime pay. This position is represented by a union for collective bargaining purposes. Salary will be predetermined based on collective bargaining agreements set rates. This position may be subject to a background check. Any convictions will be evaluated to determine if they directly relate to the responsibilities and requirements of the position. Having a conviction history will not automatically disqualify an applicant from being considered for employment. Diversity, equity, and inclusion are core values at Berkeley Lab. Our excellence can only be fully realized by faculty, students, and staff who share our commitment to these values. Successful candidates for our faculty positions will demonstrate evidence of a commitment to advancing equity and inclusion. Work will be primarily performed at Lawrence Berkeley National Lab, 1 Cyclotron Road, Berkeley, CA. Learn About Us: Equal Employment Opportunity: Berkeley Lab is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status. Berkeley Lab is in compliance with the Pay Transparency Nondiscrimination Provision under 41 CFR 60-1.4. Click here to view the poster and supplement: "Equal Employment Opportunity is the Law." Lawrence Berkeley National Laboratory encourages applications from women, minorities, veterans, and other underrepresented groups presently considering scientific research careers.
More information on this Job


ID: 32105170 - Save Job
Category: Jobs : HR Jobs
Employer Info:

IAEI

USA

We educate and equip electrical professionals while unifying the industry to promote electrical safety. Electrical inspectors, multi-hat inspectors, electrical installers and contractors, testing agencies, standards organizations, manufacturers, and distributors all working together to ensure the public safety.

International Association of Electrical Inspectors (IAEI) is a 501(c)(6) not-for-profit professional trade association committed to public safety from electrical hazards by providing expert, unbiased leadership in electrical code and standards development and premier education and certification for electrical professionals. IAEI was established in and has been in continuous operation since 1928.

901 Waterfall Way, Suite 602
Richardson, TX 75080


IAEI jobs




Recent Jobs:
Fire Electrician Harvard University Campus Services
Electrician Massachusetts Institute of Technology MIT
Building Service Engineer Salk Institute for Biological Studies
Staking Technician Rio Grande Electric Cooperative Inc
Electrician - Facilities Tufts University
SENIOR INSPECTOR University of California Irvine UCI
Utility Services Fleet Technician I-III Arkansas Electric Cooperatives
Journeyman Electrician CBRE
Sr Electrician I - Fs Construction Services Knoxville
Maintenance Technician University of Nebraska - Lincoln


More Jobs:
ASHHRA jobs
APAP jobs
ASHA jobs
ASCP jobs
SLAS jobs
SNMMI jobs
DNA jobs
NAGC jobs
NRPA jobs
NABA jobs

 

Post Your Resume

Create a profile, get found by employers.

Post Job Now

Posting a job ad is free. Create an account to post your listing now.

 
Any Questions?

We are happy to help, send us any question you like.